Products

#10 PANCLIP MTW 1000HR Low profile pancake head fastener for wood substrates; DMG85 silver or white coated carbon steel, or 304SS/316SS. SPECIFICATIONS Size: #10 x 1in to #10 x 3in Material: C1022 carbon steel, 304 Stainless Steel, or 316 Stainless Steel Coating/Finish: DMG85 Silver...

#10 PANCLIP MTW 1000HR Low profile pancake head fastener for wood substrates; DMG85 silver or white coated carbon steel, or 304SS/316SS. SPECIFICATIONS Size: #10 x 1in to #10 x 3in Material: C1022 carbon steel, 304 Stainless Steel, or 316 Stainless Steel Coating/Finish: DMG85 Silver...

#10 PANCLIP MTW 1000HR Low profile pancake head fastener for wood substrates; DMG85 silver or white coated carbon steel, or 304SS/316SS. SPECIFICATIONS Size: #10 x 1in to #10 x 3in Material: C1022 carbon steel, 304 Stainless Steel, or 316 Stainless Steel Coating/Finish: DMG85 Silver...

WOODZIP #10 / #14 METAL TO WOOD SCREW Metal to wood screw for installation of metal roofing and sidewall panels into wood substrates. Vulcanized bonded EPDM washer for positive seal against steel panels; TP-17 slotted cut point reduces driving torque. SPECIFICATIONS Size: #10 x...

WOODZIP #10 / #14 METAL TO WOOD SCREW Metal to wood screw for installation of metal roofing and sidewall panels into wood substrates. Vulcanized bonded EPDM washer for positive seal against steel panels; TP-17 slotted cut point reduces driving torque. SPECIFICATIONS Size: #10 x...

#10 WOODMAC WOODZIP SCAMP 304 STAINLESS CAP HEAD Provides cut-and-hold performance of WoodZIP fastener with added corrosion protection of a 1/4" drive 304 stainless steel head, over a DMG85 coated carbon steel shank. SPECIFICATIONS Size: #10 x 1" to #10 x 3-1/2" Material: 304...

DIRECT*SEAL MP SCREW #12 Multi-purpose fastener for panel and fixture attachment to wood, masonry, and light gauge metal substrates. SPECIFICATIONS Size: #12 x 3/4" to #12 x 8" Material: Steel Coating/Finish: DMG85 Silver full corrosion resistant coating Head: 1/4" HWH (hex washer head) Drive:...

#12 WOODZIP SCAMP 304 STAINLESS STEEL CAP HEAD Stainless cap head fastener for original installation of 5V Crimp and other metal roofing panels to wood, and replacement of worn #9/#10 metal-to-wood roofing fasteners; also tested for masonry. SPECIFICATIONS Size: #12 x 3/4" to #12...

WOODZIP #10 / #14 METAL TO WOOD SCREW Metal to wood screw for installation of metal roofing and sidewall panels into wood substrates. Vulcanized bonded EPDM washer for positive seal against steel panels; TP-17 slotted cut point reduces driving torque. SPECIFICATIONS Size: #10 x...

DEK*ZIP #14 HD ROOFING FASTENER Self-drilling fastener for insulation or membrane attachment to wood, concrete and light gauge metal decking; low slope, built-up and commercial roofing; also used as metal roofing panel clip fastener through multi-thickness insulation. SPECIFICATIONS Size: #14 x 2in to #14...

DEK*ZIP #15 XHD ROOFING FASTENER Self-drilling fastener for insulation or membrane attachment to wood, concrete and light gauge metal decking; low slope, built-up and commercial roofing. SPECIFICATIONS Size: #15 x 1-1/4in to #15 x 24in Material: C1020 Carbon steel, heat treated for ductility Coating/Finish:...

#9 WOODZIPSS (#9-15), FULL 304 STAINLESS Panel fastener for highly corrosive/coastal environments; similar to WoodZIP-SS-A but without added DMG85 Silver coating; suggested for metal roofing panel installation within 3000 lnft of salt water. Assembled with a 304SS/EPDM 12mm bonded washer. Pilot holes must be...

AVAILABLE IN CLEAR, WHITE & BLACK Cast acrylic sheet in 1/8" and 1/4" thickness, available in Clear, White (#7328), and Black (#2025) Choose from 11 sizes, from 4" x 6" up to 24" x 48" PLEASE NOTE: CUT TOLERANCE ±1/8" All acrylic sheets include...

STAINLESS STEEL DECKING AND TILE ROOFING SCREWS (305SS) True corrosion resistance for applications such as clay or concrete tile installation into wood substrates. Full 305 stainless steel decking/tile fastener with square flat head and TP-17 cutpoint. Available in full box quantities only. SPECIFICATIONS Size:...

ALUMINATOR ALUMINUM RETROFIT ROOF DRAIN All-aluminum retrofit roof drain. Heavy duty cast aluminum ring for maximum drainage; cast aluminum strainer; larger stud diameter. Includes ProSeal for strong mechanical seal preventing water back-up. Options: 2" combination clamping ring/overflow dam, 2"/4" aluminum overflow insert, 2-3/4" low...

BG1 EXPANDING UNIVERSAL CLOSURE ROLLS Precompressed self-expanding polyurethane foam with acrylate dispersion impregnation for sealing joints/seams in metal panels; expands in 8-10 hours. SPECIFICATIONS Size: 1in x 1in x 20ft; 1in x 1-1/2in x 15ft Material: Polyurethane foam Coating/Finish: Black Head: N/A (foam closure)...

PACKAGED IN THE USA — PREMIUM ACETAL MATERIAL Manufactured in the United States for reliable quality and precision cutting Crafted from high-grade POM-C acetal copolymer, offering exceptional strength and smoothness Designed for both industrial and DIY applications requiring durable, machinable plastic MULTIPLE SIZES &...

BT-13 BUTYL TAPE SEALANT ROLL Second-generation elastomeric butyl tape; non-drying, non-staining, permanently flexible; reduces galvanic corrosion, electrolysis, noise transmission, thermal transfer vibration. Not approved for Polycarbonate Panels. SPECIFICATIONS Size: 3/32in x 3/8in x 45ft to 3/16in x 2-1/2in x 20ft Material: Elastomeric butyl compound...