Fasteners

Hammer Drive Anchors. Termination bar fastener designed for installation into concrete, block, brick and stone. Zinc composition body; zinc-plated or 316 stainless steel pin. Pre-drill and hammer pin for installation. Size: 3/16" x 7/8" to 1/4" x 3". Material: Zinc body; Zinc Plated 1022...

Nailin Drive Pin Anchors (Zinc and Stainless). For installation into concrete, block, brick, and stone; zinc composition body resists corrosion; SS version has 304 stainless pin with same zinc body. Pre-drill and hammer pin for installation; tamper-proof, integral one-piece unit. Size: 1/4" x 1"...

Masonry Concrete Screws - HWH / PFH / SS. Carbon steel masonry screw type anchor with blue TFL corrosion resistant coating for medium duty application in C.I.P. concrete, hollow core block, solid block, brick, or other masonry. Drill bit included in each box of...

STEELZIP CHWH Self Drill - MTM. Precision self drilling point for metal to metal fastening of metal panels to steel substrates. Cupped hex washer head with EPDM seal washer; galvanized electro plating plus clear shank coating; SteelZip full DMG85 Silver coating on cut-washer style....

Light Transmitting Panel Fasteners (Polycarbonate / Fiberglass). Family of fasteners for translucent/light transmitting panels: 304 SS panel-to-wood screw with 3/4" cupped washer (SSA); LD carbon steel zytec-coated winged fastener for thermal poly predrill on 0.8/1.0mm sheets, wood substrate; 304 SS panel-to-steel screw (SSB); oversized...

Light Transmitting Panel Fasteners (Polycarbonate / Fiberglass). Family of fasteners for translucent/light transmitting panels: 304 SS panel-to-wood screw with 3/4" cupped washer (SSA); LD carbon steel zytec-coated winged fastener for thermal poly predrill on 0.8/1.0mm sheets, wood substrate; 304 SS panel-to-steel screw (SSB); oversized...

Translucent Panel Fastener Guide. Guide covering fasteners for installing translucent (polycarbonate) panels to wood, steel/aluminum beam or purlin/tube, and polycarbonate-to-polycarbonate stitch joints with grommet seal. Size: #14 x 3/4" to #14 x 2-1/2". Material: Stainless steel. Drive: SD3 (purlin variant). Point: SD3 point (purlin...

Panclip-SD Self Drilling MTM. Panclip low profile pancake head mated to self drilling drill point for drill and tap performance into metal and steel substrates; DMI4 head marking = 410 Stainless Steel with DMG85 coating Size: #10-16 x 1in to 1/4-20 x 7in. Material:...

Panclip-SD-L Long Length Pancake Head. #14-13 low profile head fastener for high strength applications in long lengths: panel clip, commercial roofing stress plate, plywood, nailboard, fixture attachment; installs into wood, light gauge metal up to 16ga, and masonry/concrete with 3/16in pre-drill Size: #14 x...

Panclip-SD-L Long Length Pancake Head. #14-13 low profile head fastener for high strength applications in long lengths: panel clip, commercial roofing stress plate, plywood, nailboard, fixture attachment; installs into wood, light gauge metal up to 16ga, and masonry/concrete with 3/16in pre-drill Size: #14 x...

Panclip-SD Self Drilling MTM. Panclip low profile pancake head mated to self drilling drill point for drill and tap performance into metal and steel substrates; DMI4 head marking = 410 Stainless Steel with DMG85 coating Size: #10-16 x 1in to 1/4-20 x 7in. Material:...

Panclip-SD Self Drilling MTM. Panclip low profile pancake head mated to self drilling drill point for drill and tap performance into metal and steel substrates; DMI4 head marking = 410 Stainless Steel with DMG85 coating Size: #10-16 x 1in to 1/4-20 x 7in. Material:...

Panclip-SD Self Drilling MTM. Panclip low profile pancake head mated to self drilling drill point for drill and tap performance into metal and steel substrates; DMI4 head marking = 410 Stainless Steel with DMG85 coating Size: #10-16 x 1in to 1/4-20 x 7in. Material:...

Panclip SP MTW 1000hr Coated (Sharp Point). Panclip fastener designed for clip installation into dimensional lumber; sharp point, DMG85 silver or blue coating Size: #10-13 x 1-1/4in; #12-11 x 3/4in to 2in; #14-14 x 3/4in-1in. Material: C1022 carbon steel or 304 Stainless Steel. Coating/Finish:...

#10 Panclip MTW 1000hr / 304SS / 316SS. Low profile pancake head fastener for wood substrates; DMG85 silver or white coated carbon steel, or 304SS/316SS Size: #10 x 1in to #10 x 3in. Material: C1022 carbon steel, 304 Stainless Steel, or 316 Stainless Steel....

Panclip XLP Wafer Head Fastener. Extra low profile pancake wafer head fastener for installing nail strip style standing seam panels into wood substrates Size: #10-8 to #12 x 2-1/2in. Material: C1022 carbon steel or 304 Stainless Steel. Coating/Finish: DMG85 Silver, Blue, or Zinc Plated....

Panclip XLP Wafer Head Fastener. Extra low profile pancake wafer head fastener for installing nail strip style standing seam panels into wood substrates Size: #10-8 to #12 x 2-1/2in. Material: C1022 carbon steel or 304 Stainless Steel. Coating/Finish: DMG85 Silver, Blue, or Zinc Plated....

Panclip XLP Wafer Head Fastener. Extra low profile pancake wafer head fastener for installing nail strip style standing seam panels into wood substrates Size: #10-8 to #12 x 2-1/2in. Material: C1022 carbon steel or 304 Stainless Steel. Coating/Finish: DMG85 Silver, Blue, or Zinc Plated....

Panclip XLP Wafer Head Fastener. Extra low profile pancake wafer head fastener for installing nail strip style standing seam panels into wood substrates Size: #10-8 to #12 x 2-1/2in. Material: C1022 carbon steel or 304 Stainless Steel. Coating/Finish: DMG85 Silver, Blue, or Zinc Plated....

Panclip XLP Wafer Head Fastener. Extra low profile pancake wafer head fastener for installing nail strip style standing seam panels into wood substrates Size: #10-8 to #12 x 2-1/2in. Material: C1022 carbon steel or 304 Stainless Steel. Coating/Finish: DMG85 Silver, Blue, or Zinc Plated....