Products
-
Phillips Flat Head Concrete Screw - Blue Coated - C1020 / Blue Ceramic 720hr Coating, PFH #3, HiLo Sharp (100 pcs)
MASONRY CONCRETE SCREWS - HWH / PFH / SS Carbon steel masonry screw type anchor with blue TFL corrosion resistant coating for medium duty application in C.I.P. concrete, hollow core block, solid block, brick, or other masonry. Drill bit included in each box of...- From $39.38
- From $39.38
- Unit price
- per
-
Pipe & Conduit Flashings for Metal Roofing - Round & Square Base / USA Made
PIPE AND CONDUIT FLASHINGS FOR METAL ROOFING Pipe and conduit flashings to waterproof roof penetrations in metal roofing panels. Pliable rubber or silicone with an aluminum fastening ring and grooved sealant holding base, adjustable to common roof pitches; 20 year limited warranty; 100% North...- From $32.55
- From $32.55
- Unit price
- per
-
Premium Decking Fastener - Carbon Steel / Green Ceramic Coating, Bugle Head, Standard (250 pcs)
PREMIUM DECKING FASTENERS (T-25 BAGGED) Decking screws for wood-to-wood applications such as 1"x4" to plywood. Other popular uses include installation of tile and shake roofing, exterior fencing and exterior wood deck structures. Countersink style bugle head with T-25 6-lobe drive, packaged 250 pieces per...- From $44.28
- From $44.28
- Unit price
- per
-
Razorback Ridge Vent Plus - Foam / USA Made, Ridge Vent Roll, Gray (10 pcs)
RAZORBACK RIDGE VENT PLUS Long life universal ridge vent rolls for metal roofing panels; full width positioning adhesive tape strip, heat resistant coatings and flame retardants. Not tested for FL Building Code Compliance. SPECIFICATIONS Size: 1-1/2in x 2in x 10ft to 2-1/8in x 2in...- From $238.35
- From $238.35
- Unit price
- per
-
Replacement SCAMP Tapper - 304SS - 304SS Head / C1022 Body / DMG85 Coating, CHWH, TP-17, Silver (250 pcs)
STEELZIP SCAMP 304SSC METAL BUILDING REPAIR & REPLACEMENT FASTENERS Self-drilling stainless-cap replacement fastener for metal building repair; #14 sizes replace #8/#10/#12 self-drilling fasteners, 5/16" replaces #12/#14/#17 fasteners <0.31" OD, 3/8" replaces bumble-bee 0.343"/0.359" tapping screws and #17 stitch/lap fasteners. SPECIFICATIONS Size: 1/4-14 x 1-1/4"...- From $91.01
- From $91.01
- Unit price
- per
-
Round Retrofit Flashing - Zipperboot - EPDM Rubber / USA Made, Round Split Flashing, Gray (1 pc)
SQUARE BASE / ROUND RETROFIT FLASHINGS (ZIPPERBOOT) Retrofit flashings to waterproof electrical conduit, masts, service poles and collared pipe penetrations; square base or round base (Zipperboot) with stainless steel fastening teeth. UPC approval and 20 year warranty. SPECIFICATIONS Size: #101 (1/2-4in) to #303 (9-1/4-16-1/4in)...- From $45.52
- From $45.52
- Unit price
- per
-
Snaplock Panel Clip - 1" Snaplock Econo QSL LD - Galvanized, Galvanized/Silver (250 pcs)
1" QSL ECONO SNAPLOCK CLIP Econo Snaplock clip for Quadro 1in Snaplock panels to wood or steel substrates. SPECIFICATIONS Size: 1in height x 2in width, 24 ga Material: 24ga Galvanized or 304 Stainless Steel Coating/Finish: Galvanized / Stainless Head: N/A (clip) Drive: N/A Point:...- $77.61
- $77.61
- Unit price
- per
-
Snaplock Panel Clip - 1-1/2" Snaplock 450SL HD (1-1/4") - Galvanized/Silver (250 pcs)
1-1/2" SNAPLOCK 450SL HD CLIP (1-1/4") Heavy duty Snaplock clip fitting Newtech 450SL and DMC 450SL Snaplock panel systems. SPECIFICATIONS Size: 24 ga, 3 hole, 3in width Material: G90 Galvanized or 304 Stainless Steel Coating/Finish: Galvanized / Stainless Head: N/A (clip) Drive: N/A Point:...- From $105.39
- From $105.39
- Unit price
- per
-
Snaplock Panel Clip - 1-1/2" Snaplock Econo QSL LD - Galvanized, Galvanized/Silver (250 pcs)
1-1/2" SNAPLOCK ECONO QSL LD CLIP Econo Snaplock clip fitting Quadro 1-1/2in Snaplock Panels (E1500). SPECIFICATIONS Size: 20 ga, 3 hole, 2-1/4in width Material: 20ga Galvanized or 304 Stainless Steel Coating/Finish: Galvanized / Stainless Head: N/A (clip) Drive: N/A Point: N/A Mechanical: Meets FBC...- $82.84
- $82.84
- Unit price
- per
-
Snaplock Panel Clip - 1-1/2" Snaplock NT550 HD - Galvanized/Silver (250 pcs)
1-1/2" SNAPLOCK NT550 HD CLIP Heavy duty Snaplock clip fitting Newtech 550 and D550S Snaplock panel systems. SPECIFICATIONS Size: 20 ga, 2 hole, 3-1/2in width Material: 20ga Galvanized or 304 Stainless Steel Coating/Finish: Galvanized / Stainless Head: N/A (clip) Drive: N/A Point: N/A Mechanical:...- From $139.05
- From $139.05
- Unit price
- per
-
Snaplock Panel Clip - 1-1/2" Snaplock Ultra Length QSL HD - Galvanized/Silver (1 pc)
1-1/2" SNAPLOCK ULTRA LENGTH QSL HD CLIP Heavy duty Snaplock clip fitting 1-1/2in Snaplock Panels; fits Quadro, E1500. SPECIFICATIONS Size: 18 ga, 2 hole, 3-1/2in width Material: 18ga Galvanized or 304 Stainless Steel Coating/Finish: Galvanized / Stainless Head: N/A (clip) Drive: N/A Point: N/A...- From $26.92
- From $26.92
- Unit price
- per
-
Snaplock Panel Clip - 1-1/2"/1-1/4" Snaplock Newtech 450HD - Galvanized/Silver (250 pcs)
1-1/2"/1-1/4" SNAPLOCK NEWTECH 450HD CLIP No fastener relief dimples and flat tongue. Fits 450, Plusmax, D450, SOP15 Snaplock panel systems. SPECIFICATIONS Size: 24 ga, 3 hole, 3in width Material: G90 Galvanized or 304 Stainless Steel Coating/Finish: Galvanized / Stainless Head: N/A (clip) Drive: N/A...- From $111.27
- From $111.27
- Unit price
- per
-
Snaplock Panel Clip - 1-1/4" Snaplock Utility Panel Clip - Galvanized/Silver (250 pcs)
UTILITY SNAPLOCK PANEL CLIP Utility Snaplock panel clip for 1-1/4in and 1-1/2in Utility Snaplock metal roofing panels to wood or steel substrates. SPECIFICATIONS Size: 1-1/4in / 1-1/2in, 24 ga Material: 24GA G90 Galvanized or 304 Stainless Steel Coating/Finish: Galvanized / Stainless Head: N/A (clip)...- From $67.81
- From $67.81
- Unit price
- per
-
Snaplock Panel Clip - 1-3/4" Snaplock Econo LD - Galvanized/Silver (200 pcs)
1-3/4" LD SNAP LOCK PANEL ECONO CLIP Econo clip for 1-3/4in Snaplock panels (Quadro QSL, US175, Newtech 675, CSDP175, Knudson KR-20, ES2000, DDMC175 and more). SPECIFICATIONS Size: 1.875in height x 2.25in width, 18 ga Material: G90 0.0428-0.0566in Galvanized or 304 Stainless Steel Coating/Finish: Galvanized...- From $89.58
- From $89.58
- Unit price
- per
-
Snaplock Panel Clip - 1-3/4" Snaplock Ultra Length HD - Galvanized/Silver (250 pcs)
1-3/4" SNAPLOCK ULTRA LENGTH HD CLIP Heavy duty clip for 1-3/4in Snaplock panels, multiple versions to fit Quadro, RF, Newtech 675, D175S Knudson, US175. SPECIFICATIONS Size: 18 ga, 2 hole, 3-1/2in width, height 1.88in Material: 18ga Galvanized or 304 Stainless Steel Coating/Finish: Galvanized /...- From $154.08
- From $154.08
- Unit price
- per
-
Snaplock Panel Clip - 1-3/4" Snaplock Ultra Lgth HD VMOD - Galvanized/Silver (250 pcs)
1-3/4" SNAPLOCK ULTRA LENGTH HD VMOD CLIP Clip for 1-3/4in Snaplock panels to fit E S2000, PC Snapclad, MS Verticalseam. Modified with lower fastener relief and screw holes to accommodate XLP fasteners. SPECIFICATIONS Size: 18 ga, 2 hole, 3-1/2in width, height 1.88in Material: 18ga...- From $165.52
- From $165.52
- Unit price
- per
-
Snaplock Panel Clip - 1-3/4" Zimmerman SL HD - Galvanized/Silver (250 pcs)
1-3/4" ZIMMERMAN SL HD CLIP Clip for 1-3/4in Snaplock panels, multiple versions to fit Zimmerman Z175 panels. SPECIFICATIONS Size: 18 ga, 2 hole, 3-1/2in width, height 1.83in Material: 18ga Galvanized or 304 Stainless Steel Coating/Finish: Galvanized / Stainless Head: N/A (clip) Drive: N/A Point:...- From $154.08
- From $154.08
- Unit price
- per
-
Square Base Retrofit Flashing - Grey EPDM - EPDM Rubber / USA Made, Square Flashing, Gray (1 pc)
SQUARE BASE / ROUND RETROFIT FLASHINGS (ZIPPERBOOT) Retrofit flashings to waterproof electrical conduit, masts, service poles and collared pipe penetrations; square base or round base (Zipperboot) with stainless steel fastening teeth. UPC approval and 20 year warranty. SPECIFICATIONS Size: #101 (1/2-4in) to #303 (9-1/4-16-1/4in)...- From $56.11
- From $56.11
- Unit price
- per
-
Square Base Retrofit Flashing - Red HT Silicone - High Temp Silicone / USA Made, Square Flashing (1 pc)
SQUARE BASE / ROUND RETROFIT FLASHINGS (ZIPPERBOOT) Retrofit flashings to waterproof electrical conduit, masts, service poles and collared pipe penetrations; square base or round base (Zipperboot) with stainless steel fastening teeth. SPECIFICATIONS Size: #101 (1/2-4in) to #303 (9-1/4-16-1/4in) Material: EPDM rubber or silicone (HT)...- From $87.82
- From $87.82
- Unit price
- per
-
SSR-30 Non-Skinning Standing Seam Sealant - Polyurethane Sealant, Tube, Gray (1 pc)
SSR-30 SEALANT (NON-SKINNING STANDING SEAM SEALANT) Non-hardening, self-healing sealant with superb adhesion in extreme temperatures/moisture; used as standing seam sealer, adheres to painted metals, Zincalume, Galvalume, Kynar 500; also joint sealant in foam glass applications. Not for sunlight exposure. SPECIFICATIONS Size: 10.1oz tubes Head:...- $31.69
- $31.69
- Unit price
- per
